A domain decomposition method for three species modeling of multi-electrode negative corona discharge – With applications to electrostatic precipitators

The negative corona discharge problem for multi-electrode geometries is modeled by a three species model. The equations are solved using domain decomposition, by recognizing that multiple species are only present in a small part of the domain, and hence only need to be incorporated locally in the model.The method is applied to an industrially relevant three wire electrostatic precipitator geometry. The calculated current density is in good agreement with experimental data. To further illustrate applications of the three species solution, it is used for coupled particle, fluid, and electrostatic simulations to analyze particle collection properties.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

Amphiphilic Copolymers of Polyfluorene Methacrylates Exhibiting Tunable Emissions for Ink‐Jet Printing

Functionalized polyfluorene receives more and more attention due to its wide applications. Here, the syntheses of three novel polyfluorene‐based methacrylate macromonomers exhibiting a vast flexibility for further applications are reported. Their emissions strongly depend on the end groups and thus the macromonomers provide blue, green, and red emissions simultaneously with the same excitation light of 365 nm. Their well‐defined copolymers with 2‐(dimethylamino) ethyl methacrylate via reversible addition‐fragmentation chain transfer polymerization are investigated in detail. These copolymers exhibit high quantum yields in solid film (up to 0.8), and self‐assemble into photoluminescent nanoparticles in aqueous solutions with pure blue, green, and red emissions. By simply mixing them, perfect white light emission with high quality is obtained. These aqueous nanoparticles solutions are ready for ink‐jet printing to produce exquisite bright and colorful fluorescent pictures.

     

Combined Spectroscopic and TD-DFT Analysis to Elucidate Substituent and Acidochromic Effects in Organic Dyes: A Case Study on Amino- versus Nitro-Substituted 2,4-Diphenylquinolines

A combined spectroscopic and TD-DFT case study was performed, to identify a robust method to calculate the complex near UV/Vis absorption spectra of various amino- vs. nitro-substituted 2,4-diphenylquinolines, which vary strongly under neutral and successively acidic conditions. For this, different DFT functionals were tested for geometry optimization and the TD part to calculate the neutral and different protonated species in a fast screening approach, i. e. using single point calculations in an implicit solvent. Offset-corrected M06HF, hitherto only applied to polymers, was identified as a suitable method to reproduce the absorption spectra in a reasonable fashion for all different substitution pattern and all different protonated species at different pH values; moreover, the method properly predicts the energetic ordering of low-lying n-π* and ππ* transitions, which is decisive for the non-/emissive nature of the different compounds. In all, this might provide a valuable tool for computer-aided design of related classes of compounds.     

压力诱导发光 未来可期

科技创新的根源是基于基础科学研究的提升,而“从0到1”的突破是需要长期的积累和灵感的。本文讲述了发现压力诱导发光这一新现象的思想和材料设计。     

Mitochondria-targeted fluorescent probe based on vibration-induced emission for real-time monitoring mitophagy-specific viscosity dynamic

Directly monitoring mitophagy-specific viscosity dynamic in living cells is of great significance but remains challenging. Herein, this study reported a novel mitochondria-targeted fluorescent probe DPAC-DY based on vibration-induced emission (VIE) for monitoring viscosity changes during mitochondrial autophagy. This probe contained N,N'-diphenyl- dihydrodibenzo[a,c]phenazine (DPAC) as the VIE core and two positively charged pyridinium moieties for mitochondria anchoring. As the ambient viscosity increased, the vibration of DPAC-DY could be hindered, and subsequently resulting in the enhancement of fluorescence emission. In vitro and intracellular experiments indicated that the probe DPAC-DY showed highly sensitive response to viscosity due to VIE mechanism. Importantly, by virtue of this probe, in situ and real-time visualization of the specific viscosity dynamics during the mitochondrial autophagy process was achieved. Thus, this work provides a novel strategy for VIE-based viscosity response sensors applied to specific organelles and offers a platform for in-depth study of mitochondrial viscosity-related diseases.     

EAST极紫外空间分辨光谱分析软件的开发

基于Matlab软件的图形用户界面开发环境(GUIDE)设计开发了一套交互式界面，可以自动读取、解析原始数据，开展波长标定，将谱强度与谱仪系统空间测量位置以及EAST实验放电时间等信息相关联，从而快速、便捷地计算杂质离子发出的线光谱强度的空间分布并绘图。该空间分辨光谱分析软件的开发和应用大大提高了谱仪数据处理和分析的便捷性和效率，保证了放电期间数据处理的准实时性。     

六方相LaOF∶Er,Yb的上转换发光及温度传感特性

氟氧化物兼有氧化物优异的稳定性和氟化物的低声子能量,是上转换发光材料的一种热点基质材料,因而研究六方相LaOF∶Er,Yb的上转换发光性能及其温度特性具有重要意义。本文采用水热法制备了六方相LaOF∶Er,Yb荧光材料,通过X射线衍射(XRD)、扫描电镜(SEM)和荧光光谱对其结构和上转换荧光性能进行表征。实验结果表明,水热法120℃得到六方相LaF3,经800℃和1000℃退火后分别形成四方相LaOF和六方相LaOF。980 nm激发下,六方相LaOF∶Er,Yb中Yb3+与Er3+存在能量传递,通过双光子吸收产生绿光和红光的上转换荧光,并且Yb3+与Er3+的最佳浓度分别为3%和1%。最后研究了六方相LaOF∶Er,Yb在温度传感方面的应用,其在150~400 K温度范围的相对灵敏度和绝对灵敏度分别为0.037 K-1和0.0043 K-1。该材料具有优异的温度传感特性,对荧光温度传感器件的设计和应用具有指导意义。     

超越SNOM探针通光孔径尺寸的金属纳米间隙超分辨测量

采用电磁场有限元方法,数值模拟了孔径型扫描近场光学显微镜(aperture Scanning Near-field Optical Microscopy,a-SNOM)在照明模式下的工作过程.针对金偶极天线结构,改变天线长度和纳米间隙尺寸,计算了a-SNOM探针孔径的远场辐射速率随探针端面中心坐标变化的扫描曲线,实现了超越a-SNOM探针通光孔径尺寸的天线金属纳米间隙的超分辨测量,对于100nm通光孔径的探针,可分辨最小尺寸为10nm(0.016倍波长)的金属间隙.通过对比金属和介质偶极天线的a-SNOM探针远场辐射速率测量的计算结果,表明天线金属纳米间隙的超分辨测量的实现是由于金属间隙表面等离激元的激发.